Skid (Marc's) Log
Moderator: Chebass88
-
- Registered User
- Posts: 3102
- Joined: Fri Oct 20, 2017 2:03 pm
- Location: Ft Collins, Colorado
- Age: 40
Re: Skid (Marc's) Log
Nice PR squat skid. That's my lifetime goal
- Clearwater47
- Registered User
- Posts: 616
- Joined: Tue Jan 17, 2023 12:59 pm
- Location: Minnesota, USA
- Age: 49
Re: Skid (Marc's) Log
Awesome squat! There's no feeling quite like that PR feeling.
- JohnHelton
- Registered User
- Posts: 4515
- Joined: Wed Apr 11, 2018 12:17 pm
- Location: Bozeman, MT
- Age: 52
- Contact:
Re: Skid (Marc's) Log
Damn, Skid! 235 kg definitely looks possible!
- Skid
- Registered User
- Posts: 1892
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 61
Re: Skid (Marc's) Log
Thanks @DCR, @Renascent, @Cole, @JohnHelton
500 lbs has eluded me for a while. Let's see if I can do it in competition too!
Just noted the Canadian record I was aiming at was recently bumped up as of last weekend. Now 272.5kg/600 lbs. No chance of that now.
Did my last heavy deadlifts before the meet - Couple singles at 485 - These were hard enough so my CNS needs a break for sure.
Did some light speed deadlifts at 220 as well
Did some incline DB work as too - 3 sets of 12 with 85lbs.
500 lbs has eluded me for a while. Let's see if I can do it in competition too!
Just noted the Canadian record I was aiming at was recently bumped up as of last weekend. Now 272.5kg/600 lbs. No chance of that now.
Did my last heavy deadlifts before the meet - Couple singles at 485 - These were hard enough so my CNS needs a break for sure.
Did some light speed deadlifts at 220 as well
Did some incline DB work as too - 3 sets of 12 with 85lbs.
- Skid
- Registered User
- Posts: 1892
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 61
Re: Skid (Marc's) Log
Continuing taper for meet:
Leg press
90-5
180-5
270-5
360-5
450-5,5,5, 40 pound increase over last week but dropped from 10 to 5 reps
Hack squat
0 (sled only) -5
140-5,5, - again, increased weights/intensity but dropped reps in half to lower fatigue levels
Super-setted bench in between leg press/hack squats
Close grip 3 count pause bench - Didn't go with crazy close grip but a couple inches in from my comp grip
Bar-lots
155-5
265-1
326-3,3,3, - went well with a rep or two in the tank
Spoto bench with close grip (same grip as above)
265-5,5,5, - did these slow/non-stop, constant tension stopping an inch from my chest and an inch from lockout - again few reps in the tank
Leg press
90-5
180-5
270-5
360-5
450-5,5,5, 40 pound increase over last week but dropped from 10 to 5 reps
Hack squat
0 (sled only) -5
140-5,5, - again, increased weights/intensity but dropped reps in half to lower fatigue levels
Super-setted bench in between leg press/hack squats
Close grip 3 count pause bench - Didn't go with crazy close grip but a couple inches in from my comp grip
Bar-lots
155-5
265-1
326-3,3,3, - went well with a rep or two in the tank
Spoto bench with close grip (same grip as above)
265-5,5,5, - did these slow/non-stop, constant tension stopping an inch from my chest and an inch from lockout - again few reps in the tank
-
- Registered User
- Posts: 3102
- Joined: Fri Oct 20, 2017 2:03 pm
- Location: Ft Collins, Colorado
- Age: 40
Re: Skid (Marc's) Log
is your leg press / hack squat machine a quality addition to your gym? Where did you get it and was it a thousand bucks or less? Im asking bc Im starting to think some accessory work for my knee extensors might be helpful and I have a little space for it. But I dont want to buy a piece of shit that takes up space and I end up never using.
- Skid
- Registered User
- Posts: 1892
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 61
Re: Skid (Marc's) Log
I paid $2k for mine with taxes and delivery. Supposedly rated to 1600 pounds.It came in a big wood crate and took 3 of us to assemble it due to the weight of the components. No instructions either, just a diagram.cole wrote: ↑Sat Mar 02, 2024 9:52 am is your leg press / hack squat machine a quality addition to your gym? Where did you get it and was it a thousand bucks or less? Im asking bc Im starting to think some accessory work for my knee extensors might be helpful and I have a little space for it. But I dont want to buy a piece of shit that takes up space and I end up never using.
All in all I'm happy with it. I feel it's contributed to bumping up my squat. It is a different variation and targets the quads better than squats. Saves on the back too as it just seems to work the legs.
- Skid
- Registered User
- Posts: 1892
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 61
Re: Skid (Marc's) Log
Today's my last heavy squat and bench day - I'm just under two weeks out from my meet. I'm basically following Mike Israetel's peaking method for a master's lifter with some minor changes. Here if anyone is interested - https://www.jtsstrength.com/peaking-powerlifting/
Squat
bar-10
155-5
265-5
375-1
429-1
463-3,3, Vid 1st set - 1st set was rpe 8.5, 2nd set was a 9.5 I think the most I've done previously was 455 for a double before so likely a PR
Comp Bench
Bar-20
155-5
265-2
335-3,3, Vid
287-5,5, - Did these non-stop no rest top or bottom
Did calf raises and GHR too
Squat
bar-10
155-5
265-5
375-1
429-1
463-3,3, Vid 1st set - 1st set was rpe 8.5, 2nd set was a 9.5 I think the most I've done previously was 455 for a double before so likely a PR
Comp Bench
Bar-20
155-5
265-2
335-3,3, Vid
287-5,5, - Did these non-stop no rest top or bottom
Did calf raises and GHR too
- Skid
- Registered User
- Posts: 1892
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 61
Re: Skid (Marc's) Log
10 days out from my meet - nothing heavy or fatiguing now or going forward
Light deadlift
Bar-10
155-5
265-3
375-3 - Did these for speed
DB Incline bench - slight incline - 1st hole up on the bench
50's-10
105's-10,10, - stopped well short of failure
Light deadlift
Bar-10
155-5
265-3
375-3 - Did these for speed
DB Incline bench - slight incline - 1st hole up on the bench
50's-10
105's-10,10, - stopped well short of failure
- Skid
- Registered User
- Posts: 1892
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 61
Re: Skid (Marc's) Log
8 days out now. Trying to shed any accumulated fatigue but still lift around 2/3 of my max for bench, a bit less on the leg press
Worked up to 270 for 3 sets of 3 on the leg press
Worked up to 242 for 3 sets of 3 on comp bench
Worked up to 270 for 3 sets of 3 on the leg press
Worked up to 242 for 3 sets of 3 on comp bench
- Skid
- Registered User
- Posts: 1892
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 61
Re: Skid (Marc's) Log
Meet prep - 5 days out
Squats - Just concentrated on moving these as quick as I could
Bar-5
155-3
265-3,3,3,
155-3,3,3,
Squats - Just concentrated on moving these as quick as I could
Bar-5
155-3
265-3,3,3,
155-3,3,3,
- Skid
- Registered User
- Posts: 1892
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 61
Re: Skid (Marc's) Log
Last bit of training before meet.
Yesterday just did some light benching - 265 for 3 sets of 3 - did these at 80% of maximum speed so tried to move them fairly fast
Today did very light deadlifts and squats 155-3 sets of 3 each, again going for speed, but going with a little less speed effort as I didn't want to blow a hammie before the meet.
My meet day is Saturday, but my youngest boy lifts Friday afternoon so were heading to Vancouver Friday morning and will stay in a hotel overnight Friday. I'm his coach Friday and then he will be my coach Saturday. Should be fun!
Yesterday just did some light benching - 265 for 3 sets of 3 - did these at 80% of maximum speed so tried to move them fairly fast
Today did very light deadlifts and squats 155-3 sets of 3 each, again going for speed, but going with a little less speed effort as I didn't want to blow a hammie before the meet.
My meet day is Saturday, but my youngest boy lifts Friday afternoon so were heading to Vancouver Friday morning and will stay in a hotel overnight Friday. I'm his coach Friday and then he will be my coach Saturday. Should be fun!
- Renascent
- Desperado
- Posts: 3122
- Joined: Sun Jun 21, 2020 10:42 am
- Age: 39
Re: Skid (Marc's) Log
Good luck!
-
- Registered User
- Posts: 3102
- Joined: Fri Oct 20, 2017 2:03 pm
- Location: Ft Collins, Colorado
- Age: 40
Re: Skid (Marc's) Log
Good luck skid!
- DanCR
- Registered User
- Posts: 4722
- Joined: Sat Dec 14, 2019 11:06 am
- Location: Louisiana
- Age: 45
Re: Skid (Marc's) Log
Good luck to you both, and have fun.
- Skid
- Registered User
- Posts: 1892
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 61
Re: Skid (Marc's) Log
Thanks @@Renascent @@cole and @@DCR
Well, my meet is over and things went well.
Squat
Opener - 215kg/474lb - Got two whites and a red for depth
2nd - 227.5kg/501lb - Meet PR - Made sure I buried it and met my goal of over 500lbs in a meet
3rd - 232.5kg/512lb - All time PR, 12.5kg over my previous meet best and 5kg over my gym best - felt I left a bit in the tank on this, but happy with the result.
Bench
Opener - 155kg/342lb - went good
2nd - 162.5kg/358lb - harder, but a bit left in the tank
3rd - 167.5kg/369lb - tied my previous meet PR, a bit under my gym PR - Not much left here, pretty maxed out.
Deadlift
Opener - 235kg/518lb - Felt heavy but moved well
2nd - 247.5kg/545lb - Getting close to max
3rd - 255kg/562lb - All time PR, 5kg over my previous meet best - The weight moved well, but almost lost the grip in my right hand.
Total - 655kg/1444lbs -
I went 9 for 9 and set Masters 3 provincial records on all lifts and total. Pr'd my squat and deadlift, and tied my best comp bench from 5 years ago, although I had to jump up in a weight class as I weighed 111kg vs my usual under 105kg weight class. Didn't feel like trying to cut.
Sometimes I wonder why I even compete, as I find it stressful. Glad it's over anyways...
New CPU rules prevented my son (my coach) from taking video, but the event was recorded on a live stream broad cast. I'll see if I can get video and post it later. Right now I'm pretty tired from spending 2 days at a meet (coached my son yesterday), and the long drive home. Time for a good hot soak in the tub!
Well, my meet is over and things went well.
Squat
Opener - 215kg/474lb - Got two whites and a red for depth
2nd - 227.5kg/501lb - Meet PR - Made sure I buried it and met my goal of over 500lbs in a meet
3rd - 232.5kg/512lb - All time PR, 12.5kg over my previous meet best and 5kg over my gym best - felt I left a bit in the tank on this, but happy with the result.
Bench
Opener - 155kg/342lb - went good
2nd - 162.5kg/358lb - harder, but a bit left in the tank
3rd - 167.5kg/369lb - tied my previous meet PR, a bit under my gym PR - Not much left here, pretty maxed out.
Deadlift
Opener - 235kg/518lb - Felt heavy but moved well
2nd - 247.5kg/545lb - Getting close to max
3rd - 255kg/562lb - All time PR, 5kg over my previous meet best - The weight moved well, but almost lost the grip in my right hand.
Total - 655kg/1444lbs -
I went 9 for 9 and set Masters 3 provincial records on all lifts and total. Pr'd my squat and deadlift, and tied my best comp bench from 5 years ago, although I had to jump up in a weight class as I weighed 111kg vs my usual under 105kg weight class. Didn't feel like trying to cut.
Sometimes I wonder why I even compete, as I find it stressful. Glad it's over anyways...
New CPU rules prevented my son (my coach) from taking video, but the event was recorded on a live stream broad cast. I'll see if I can get video and post it later. Right now I'm pretty tired from spending 2 days at a meet (coached my son yesterday), and the long drive home. Time for a good hot soak in the tub!
- DanCR
- Registered User
- Posts: 4722
- Joined: Sat Dec 14, 2019 11:06 am
- Location: Louisiana
- Age: 45
Re: Skid (Marc's) Log
Incredible results, @Skid. You laid a beatdown on this meet. Enjoy the tub haha
- Clearwater47
- Registered User
- Posts: 616
- Joined: Tue Jan 17, 2023 12:59 pm
- Location: Minnesota, USA
- Age: 49
Re: Skid (Marc's) Log
That's a great meet! Congratulations.
-
- Registered User
- Posts: 3102
- Joined: Fri Oct 20, 2017 2:03 pm
- Location: Ft Collins, Colorado
- Age: 40
Re: Skid (Marc's) Log
Damn skid, you are a hoss right now...111kg and over 1400 total is beast mode. Great job
- mgil
- Shitpostmaster General
- Posts: 8645
- Joined: Wed Sep 13, 2017 5:46 pm
- Location: FlabLab©®
- Age: 49
Re: Skid (Marc's) Log
Congratulations to you and your son for getting up on the platform, @Skid!